Filter
Top Products
Listening operations
15
RQT7364
5
4
7
1
3
2
DEL
4
/REW/
4
,
3
/FF/
¢
1
CD
6
➞
CLEAR
2
PROGRAM
3
DISC
4
123
45
ABC
DEF
GHI JKL
5
123
45
6
789
0
10
ABC
DEF
GHI JKL MNO
TUV WXYZPQRS
SPACE
6 Repeat steps 3, 4, 5.
7
CD
6
CDs
Program play
This function allows you to program up to 24 tracks.
1 Press [CD 3/8] and then [7 CLEAR].
2 Press [PROGRAM].
3 Press [DISC].
4 (within 10 seconds or so)
Press [1] – [5] to select the disc you want.
5 Press the numeric button(s) to select the
desired track.
6 Repeat steps 3 through 5 to program other tracks.
7 Press [CD 3/8] to start play.
When “CD FULL” appears
The number of programmed tracks is limited to 24 only.
You can do the following during program mode:
Check program contents on the display.
Press [
44
44
4/REW/4] or [
33
33
3/FF/¢] in the stop mode.
Add to the program.
Repeat steps 3 through 5 in the stop mode.
Memory retention
Your program is retained in memory for about 1 week while the
system is unplugged.
To replay your program
If you turned OFF your program with [PROGRAM], you can
play it again as explained below.
1.Press [PROGRAM].
2.Press [CD 3/8].
Notes
• During program play, you can search forward or backward
only within the current track.
• During program play, skipping is always in the programmed
order, whether forward or backward.
• You can use repeat mode with program play.
• You cannot program CD-DA together with MP3 tracks.
To
cancel program
play mode
clear the last track
clear all
programmed tracks
select a two-digit
track
Action
Press [PROGRAM] in the stop mode.
Programmed contents will be saved in
memory.
Press [DEL] in the stop mode.
Press [7 CLEAR]. Within 5 seconds,
press the button again to clear all
tracks. “CLEAR ALL” is displayed.
Press [
h
10] and then the two numbers
you want.
RQT7364-P_09-15_EN 30/12/03, 10:35 am15