Filter
Top Products
Simple setup
7
RQT6945
Speaker assembly
Preparing the center speaker
Preparing the front and surround speakers
4 Speaker units 4 Stands 4 Bases 2 Short cables
(for FRONT L/R)
2 Long cables
(for SURROUND L/R)
8 Screws
Speaker
unit
Stand
Base
Speaker unit
Stand/Base
Place into
groove.
Position wire in grooves as
necessary avoiding knots.
Confirm screw is
securely fastened.
Confirm screw is
securely fastened.
Place into groove.
Connect the
speaker cables.
Fit into groove.
Connect the
speaker cables.
(
\\
above)
1 Short cable
(for CENTER)
Connecting the cables
The speaker units, stands, and bases for the front and surround speakers are the same.
Only the lengths of the cables are different.
Black
Red
Copper
Silver
1 Sheet of speaker
feet (4 feet per sheet)
¡You can put front and surround speakers on the shelf by connecting a speaker directly to the base.
Simple setup
STEP 1
\
\
Stand + Base
1
Speaker unit + Stand/Base
2
Stand
Approx.
120 mm
(4-3/4")
Fit into groove.
Base
Connect the
speaker cables.