Filter
Top Products
Click!
VIDEO
OUT
Television
VIDEO IN
COMPONENT
VIDEO IN
PB PR
Y
S VIDEO
OUT
S VIDEO IN
COMPONENT VIDEO OUT
PB
PR
Y
TO SUBWOOFER
Å
h
AM ANT
FM ANT
EXT
LOOP
75Ω
Main unit
Adhesive tape
Place the antenna
where reception is
best.
Stand the antenna up on
its base.
Keep loose antenna cord
away from other wires
and cords.
■ Connecting a television using the VIDEO IN terminal
■ Connecting a television using the COMPONENT
VIDEO IN terminals
■ Connecting a television using the S VIDEO IN terminal
Connect directly to your television.
Do not connect the unit through a video cassette
recorder, because the picture may not be played
correctly due to the copy guard.
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or
progressive output and provide a purer picture
than the S VIDEO OUT terminal. Connection using
these terminals outputs the color difference signals
(PB/PR) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
¡The description of the component video input
terminals depends on the television or monitor
(e.g. Y/PB/PR, Y/B-Y/R-Y, Y/CB/CR).
Connect to terminals of the same color.
¡After making this connection, change the black
level for a better picture (\ page 29, Video—
Black Level Control).
To enjoy progressive video
¡Connect to the component video (480P) input terminals on a television compatible with
this unit’s copy guard system. (Video will not be displayed correctly if connected to an
incompatible television.)
¡Press [PROGRESSIVE OUT] on the main unit so “PROGRESSIVE” appears on the
display (\ page 13).
¡All televisions manufactured by Panasonic and that have 480P input connectors are
compatible. Consult the manufacturer if you have another brand of television.
S VIDEO OUT terminal
The S VIDEO OUT terminal achieves a more vivid
picture than the VIDEO OUT terminal by separating
the chrominance (C) and luminance (Y) signals.
(Actual results depend on the television.)
Video cable
Video cables
(not included)
S video cable
(not included)
Connect the AC power supply cord after
all other connections are complete.
Conserving power
The unit consumes power (approx. 0.5 W)
even when it is turned off with [POWER 8].
To save power when the unit is not to be
used for a long time, unplug it from the
household AC outlet.
Remember to reset the radio stations and
any other memory items before using the
unit again.
Information you enter into the unit’s
memory remains intact for up to 2 weeks
after the AC power supply cord is
disconnected.
11
RQT6945
Simple setup
AM loop antenna
3
FM indoor antenna
4
Connection to your television
5
AC power supply cord
6
To household AC outlet
(AC 120 V, 60 Hz)