Filter
Top Products
19
RQT6750
Disc operations
[DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
[DVD-A]
The unit plays tracks in all the groups on a disc.
Press [1] (play).
You can select up to 24 items to play in the order you choose.
[VCD] [CD] (There is no on-screen display.)
You can program all the items on discs.
[DVD-A] [DVD-V] [WMA] [MP3]
You can program all the items on a disc in the play position.
1 [VCD] [CD]
Press the [DISC] and then the disc
button ([DISC 1]–[DISC 5]).
2 Press the numbered buttons to select
a title, chapter, group or track ([WMA] [MP3]
then press [ENTER]).
≥To select a 2-digit number
Example: To select item 25, press [S10] ➡ [2] ➡ [5].
[WMA] [MP3] [2] ➡ [5] ➡ [ENTER]
≥Repeat this step to program other items.
≥[VCD] [CD]
Step 1 is unnecessary when programming tracks on the
same disc.
≥[DVD-A] [DVD-V] [WMA] [MP3]
To select an item using the cursor buttons
Press [ENTER] and [3, 4] to select an item, then press
[ENTER] again to register the number.
All the items in the selected disc, title or group are selected
when you select “ALL”.
3 Press [1] (play).
To add or change the program
[VCD] [CD] (Add only)
Repeat steps 1 and 2.
[DVD-A] [DVD-V] [WMA] [MP3]
Press [3, 4] to select an available item, then repeat step 2.
To clear an item
[VCD] [CD]
Press [CANCEL].
[DVD-A] [DVD-V] [WMA] [MP3]
1 Select the item you want to clear with [3, 4].
2 Press [CANCEL], or select “Clear” with [3, 4, 2, 1] and press
[ENTER].
To clear the whole program
[VCD] [CD]
Press [∫] so “CLEAR” is displayed.
[DVD-A] [DVD-V] [WMA] [MP3]
Select “Clear all” with [3, 4, 2, 1] and press [ENTER].
\Note\
≥[DVD-V] [WMA] [MP3]
Times are not displayed while programming.
≥[VCD] [CD]
Items the unit cannot find can be programmed but are canceled
during play. This is also the case if you program DVD-RAM, DVD-
Audio, DVD-Video, WMA, MP3 and JPEG.
≥The program is cleared when you switch the unit to standby, select
another source, exit the program mode by pressing [PLAY MODE]
or move the disc out of the play position.
[VCD] [CD]
The program is retained in memory.
[VCD] [CD] (There is no on-screen display.)
1-DISC (RND): You can play a disc in the play position in random
order.
ALL-DISC (RND): You can play all discs in random order.
[DVD-A] [DVD-V] [WMA] [MP3]
You can play items on a disc in the play position in random order.
1 [DVD-A] [DVD-V]
Press the numbered buttons to select
a title or a group.
[DVD-A]
≥You can select more than one group.
≥To enter all groups, select “All” using [2, 1] and press
[ENTER].
≥To deselect a group, press the numbered buttons
corresponding to the group you want to clear.
2 Press [1] (play).
[Note\
During random play, empty trays are skipped and the playback
control function on Video CDs is canceled.
\Note\
Disable HighMAT disc play to use random and program play.
In the SETUP menu, set “HighMAT” to “Disable” (➡ page 34) and perform the necessary operations (➡ above).
Common procedures for all group, program
and random play
While stopped
Press [PLAY MODE].
Each time you press the button:
[DVD-A] [DVD-V] [WMA] [MP3]
All group ([DVD-A])>Program> Random>off (Normal play)
^-------------------------------------------------------------------------------------}
[VCD] [CD]
(PGM)>1-DISC (RND)>ALL-DISC (RND)>off (Normal play)
^------------------------------------------------------------------------------------------}
[DVD-A]
If you select bonus groups, you will have to enter a password
(➡ page 17).
All group play
Program play
PROGRAM
Choose a title and chapter, then press ENTER.
No Time
T
Press PLAY to start
Play
Clear
Clear all
SELECT
ENTER RETURN
1
C
SELECT
NUMBER
09
Example [DVD-V]
TRCK
PGM
Disc No.
Track No. Program No.
Example [CD]
Random play
Random Playback
Title 1
0Press PLAY to start
RND
Example [DVD-V]