Filter
Top Products
15
RQT6750
Disc operations
[VCD] [CD] [WMA] [MP3]
The unit usually plays the disc in the play position and then stops.
Turn sequential play on to play all loaded discs, except for DVDs and
JPEG discs.
While stopped
Press [SEQUENTIAL].
Each time you press the button:
SEQ on()SEQ off
[Note\
≥HighMAT menus and video CD playback control are disabled.
≥Only audio tracks can be played on HighMAT discs.
≥You cannot change the mode during program or random play.
≥Sequential Mode turns off when you switch the unit to standby.
≥Repeat function does not work when using Sequential Mode.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
Main unit only
1 Press [DISC EXCHANGE].
The drawer opens and the disc in the play position comes to
the front-left position.
2 Change the disc in the front-left
position.
3 Press [DISC EXCHANGE].
The drawer closes.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
You can change the other discs without interrupting play.
Main unit only
1 Press [<] to open the drawer.
2 Press [DISC SKIP] to rotate the
carousel.
The carousel moves one tray clockwise and each subsequent
press moves it two trays in alternate directions.
3 Change the disc and press [<] to
close the drawer.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
During play
Press [P.MEMORY] (or [POSITION
MEMORY]) to memorize a position.
Press again to replace the position.
This position is saved even if you turn the unit off, change the source
or change discs. When you turn the unit on, reselect “DVD/CD” or
reinsert the disc whose position you memorized, “RESUME” lights
on the display. Press [1] (play) to start play from the memorized
position. The position is cleared.
≥You can memorize positions on up to five different discs at a time.
When you memorize another position, the earliest position is
replaced.
≥You cannot recall the position in Sequential Mode.
“RESUME” lights on the display when the unit has recorded the
position at which you stopped play.
Press [1] (play) to start play from that position.
≥The position is cleared when you:
—Turn the unit off.
—Select another source or change discs.
≥Press [∫] to clear the position.
[DVD-V]
The following message appears
immediately after you press [1] (play)
when “RESUME” is displayed.
Press [1] (play) while the message is
displayed and the beginning portions of
each chapter up to the current one are
played.
Full play resumes from the point where you pressed [∫] or
[P.MEMORY] (or [POSITION MEMORY]).
(This feature works only within a title.)
If you do not press [1] (play), the message disappears and play
starts from where you pressed [∫] or [P.MEMORY] (or [POSITION
MEMORY]).
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Skip back a few seconds within the current item (program, track or
title).
[JPEG]
Skip back a few pictures.
During play
Press [QUICK REPLAY].
[Note]
This feature may not work while playing some parts of a disc or at all
with some discs.
Sequential play
Changing the disc in the play position
Changing other discs during play
SEQ
Position Memory function
Resume function
Chapter Preview
Replaying a scene—QUICK REPLAY
Position memorized
Press PLAY to Preview Chapters