Filter
Top Products
28
RQT7969
Troubleshooting guide
Troubleshooting guide
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the chart
do not solve the problem, refer to the “Customer Services Directory” on page 31 if you reside in the U.S.A., or refer to the “Product information” on
page 30 if you reside in Canada.
Power Page
Unresponsive or inoperable function
Specific operation undesirable or unexpected
Subtitle
Marker
A-B repeat
Sound abnormal or improper
No power. ≥Insert the AC power supply cord securely. 7
The unit is automatically
switched to the standby mode.
≥The Sleep timer was working and had reached the set time limit. 23
No response when any buttons
are pressed.
≥This unit cannot play discs other than the ones listed in these operating instructions.
≥
The unit may not be operating properly due to lightning, static electricity or some other external
factor.
Turn the unit off and then back to ON. Alternatively, turn the unit off, disconnect the AC
power supply cord, and then reconnect it.
≥Condensation has formed: Wait 1 to 2 hours for it to evaporate.
9
—
—
No response when remote
control buttons are pressed.
≥Check that the batteries are installed correctly.
≥The batteries are depleted. Replace them with new ones.
≥Aim the remote control at the display and operate.
7
7
8
Cannot play DVD’s. ≥CD Mode is on. Press [SHIFT]i[CD MODE] to turn CD Mode off. 12
No picture or sound. ≥Check the video or audio connection.
≥Check the power or input setting of the connected equipment.
≥Check that the DVD-RAM has something recorded on it.
4, 6,
25
—
—
You have forgotten your ratings
password.
Reset all the settings to Factory
Preset.
≥While stopped and “DVD/CD” is the source, press and hold [∫] on the main unit and [S10] on
the remote control until “Initialized” disappears from the television. Turn the unit off and on again.
All settings will return to the default values.
—
It takes time before play starts.
[MP3]
≥Play may take time to begin when an MP3 track has still picture data. Even after the track starts,
the correct play time will not be displayed. This is normal.
—
Folders deeper than the eighth
layer on a data CD are not displayed
correctly.
[WMA] [MP3] [JPEG]
≥Folders deeper than the eighth layer are displayed as the eighth layer. —
A menu screen appears during
skip or search. [VCD]
≥This is normal for Video CD’s. —
Playback control menu doesn’t
appear. [VCD]
with playback control
≥Press [∫] twice and then press [1] (play). —
The program and random play
functions do not work. [DVD-V]
≥These functions do not work with some DVD-Videos. —
Programmed items are not
played. [DVD-V]
≥Some items cannot be played even if you have programmed them. —
The on-screen menu shows “2”
as a soundtrack option when
[AUDIO] isnd rV 46(nd r) i.2(V ,(s)-1 b3(k)66.1( )7(t(nd r))t( i)8h(s) r)J0 -1.1364 0 0.0102 Tc-0.0155 Tc[(a)5.6(s)5..1(ndt)di.1(m)5. 5.1(m)5.e(s)5.6( a)5.n.1(m)5.t3( )]TJ(canno7(k)5.e)5.6(ndo)1g.7(24)-5.21