Filter
Top Products
25
RQT7969
Operating other equipment
Operating other equipment
You can use the remote control to operate a Panasonic television or a video cassette recorder. Connect your equipment referring to “Connection
example” (➜ above).
[Note]
The remote control may not work properly with some models.
Preparation
Aim the remote control at the unit and press [TV] to light up the
button, and then aim it at the television for the following operations:
Turning the television on/off
Press [Í AV SYSTEM].
Switching the television’s video input mode
Press [SHIFT]i[TV/VIDEO].
Changing channels
Press [W CH X].
≥[S10/ENTER] is used to confirm channel selection on some
televisions manufactured by other companies.
Adjusting the volume
Press [TV VOLs] or [TV VOLr].
Preparation
≥Change the video input mode on the television (“VIDEO 2” in the
example).
≥Aim the remote control at the unit and press [VCR] to light up the
button, and then aim it at the video cassette recorder for the
following operations:
Turning the video cassette recorder on/off
Press [Í AV SYSTEM].
Play, pause and stop
Press [1] (play), [;] or [∫].
Fast forward and rewind
Press [6] or [5].
Connecting a laser disc, tape or record player
Connect instead of a video cassette recorder (➜ above) and select
“AUX” as the source.
We recommend using a record player with a built-in phono equalizer.
If your player doesn’t have a built-in equalizer, connect it first to a
separate equalizer and then to the unit.
This remote control can also operate some other brands of
televisions and video cassette recorders. Change the code to
operate such equipment (➜ back cover).
Aim the remote control at the equipment.
While pressing [TV] or [VCR]
Press a numbered button to enter the first
digit, and then the second digit.
The remote control outputs the on/off signal. If the code is correct,
the equipment turns on or off. If it doesn’t, try entering another code.
[Note]
Reenter the codes after you change the batteries.
AC IN
R
L
R
L
L
R
COMPONENT
COMPONENT
VIDEO OUT
VIDEO OUT
(480p/480i)
(480p/480i)
P
R
P
B
Y
S-VIDEO
S-VIDEO
OUT
OUT
AUX
AUX
SUBWOOFER
FRONT
FM ANT
75
AM ANT
SPEAKERS
LOOP
EXT
CENTERSURROUND
VIDEO
VIDEO
OUT
OUT
VIDEO OUT AUDIO OUT
R
L
AUDIO OUT
R
L
VIDEO IN
2
1
Television
(not included)
Video cassette recorder
(not included)
To show video from the video
cassette recorder
Select “VIDEO 2” input on your
television in this example.
Already connected
(➜ page 6)
Connect instead of the
television to play audio from
the video cassette recorder
Audio cable
(not included)
Video cable
(not included)
: Signal flow
To play audio from the television
Reduce the volume on the television
to its minimum and control the
volume on this unit.
∫ Connection example
Operating the television and the video cassette recorder
Television
VOLUME
CH
SKIP
SLOW/SEARCH
MENU
DIRECT
NAVIGATOR
TOP MENU
RETURN
FUNCTIONS
VCR
TV
TUNER/BAND
DISC
SUBWOOFER
LEVEL SUPER SRND
C.FOCUS
SFC
CD MODE
PLAY MODE
TEST
CH SELECT
SETUP
MUTING
MIX
2
CH
PL
ZOOM
CM SKIP
SUBTITLE
AUDIO
PLAY SPEED
QUICK REPLAY
SLEEP
QUICK OSD
ADVANCED
DISC REVIEW
FL DISPLAY REPEAT
SHIFT
ANGLE/PAGE
GROUP
AV SYSTEM
DVD/CD
PLAY
LIST
TV VOLTV VOL
ENTER
ENTER
12
6
9
45
7
8
CANCEL
0
510
3
TV/VIDEO
AUX
TV VOL
CH
,
TV/VIDEO,
AUX
TV VOL
AV SYSTEM
10/ENTER
SHIFT
TV
VCR
Numbered
buttons
Video cassette recorder
Changing the remote control code