Filter
Top Products
7
RQT7953
Speaker setup Step 1
7.5 - 9.4 mm
SC-HT15
3.0 - 4.0 mm
180 mm
174 mm
Screw
(not included)
Attaching to a wall
Wall or pillar
30 - 35 mm
7 - 9 mm
Surround speakers
2
SC-HT17
SC-HT15
CENTER
FRONT (R)
FRONT (L)
SURROUND
(L)
2 1 4 3 5
SURROUND
(R)
4
3
1
5
2
6 Ω
FRONT
4 Ω
CENTER
4 Ω
SURROUND
R L R L
Connect the speaker cables to the subwoofer.
Subwoofer
Copper
Silver
Note
Never short-circuit positive (+)
and negative (–) speaker wires.
Copper
Silver
Other speaker setup options
• The wall or pillar on which the speakers are to be attached should be capable of
supporting 10 kg per screw. Consult a qualified building contractor when attaching
the speakers to wall. Improper attachment may result in damage to the wall and
speakers.
• When mounting the speakers to walls, use a string (not included) to prevent them
from falling (
è page 6).
• (SC-HT17 front and surround speakers, SC-HT15 front speakers) Use of optional
speaker cables are recommended when mounting. (You can also remove the
speaker cables from the pipes supplied with this system.)
Fitting optional speaker stands
SC-HT15
60 mm
Plate thickness +7 to 10 mm
Speaker
stands (not
included)
Surround speakers
• Observe the diameter and length of the
screws and the distance between screws
as shown in the diagram.
• The stands must be able to support over
10 kg.
• The stands must be stable even if the
speakers are in a high position.
5 mm, Pitch 0.8 mm
SC-HT17EB-EN.fm Page 7 Wednesday, March 9, 2005 10:57 AM