Filter
Top Products
Operations
18
RQT7953
The radio
Input the frequency of the station.
Remote control
1.Press [-TUNER/–BAND] to select “TUNER”.
2.Press and hold [-TUNER/–BAND] to select “FM” or
“AM”.
3.Press [DISC, DIRECT TUNING].
4.Press the numbered buttons to enter the frequency.
e.g. To select 107.90 MHz, press [1] → [0] → [7] → [9]→ [0]
• If you do not press a button while the cursor is flashing, the
display returns to the frequency being received.
• If the frequency has not been input correctly, “ERROR” will be
displayed.
The FM stations the unit can receive are preset in channels 1 to
30. The AM stations the unit can receive are preset in channels
21 to 30. (FM stations are replaced if any were preset in these
channels.)
Preparation: Select “FM” or “AM”.
Main unit
1.Press [MENU] to select “MEMORY”.
2.Press and hold [TUNE 2].
The tuner presets all the stations it can receive into the channels
in ascending order.
If you press and hold [TUNE 1], it starts from the current
frequency.
During automatic presetting, the memory indicator (M) flashes
and the frequency scrolls. The memory indicator and channel
numbers are displayed for a second when a station is preset.
The last station to be preset is displayed when presetting
finishes.
To cancel
Press and hold [MENU].
Direct tuning
Automatic presetting
Preset the stations one at a time.
Preparation: Tune to the station you want to preset.
Main unit
1.Press [MENU] to select “MEMORY”.
2.Press [TUNE 2 or 1] to select the channel.
3.Press [MENU] to store.
To cancel
Press and hold [MENU].
For your reference
FM stations can also be preset in the MONO mode.
Remote control
Press [
1, CH, 2].
or
Press the numbered buttons.
For channels 1 to 9, press the corresponding number.
For channels 10 or over, press [
≧ 10, -/--], then the two digits.
e.g. To select channel 21: [
≧ 10, -/--] → [2] → [1]
You can improve FM reception by switching reception to
monaural.
Main unit
1.Press [MENU] to select “FM MODE”.
2.Press [TUNE 2 or 1] to select “MONO”.
Select “AUTO” to cancel.
3.Press [MENU].
“MONO” lights.
Manual presetting
Selecting channels
FM mode
To switch between FM and AM on the main unit
1. Press [MENU] to select “BAND”.
2. Press [TUNE 2 or 1] to select “FM” or “AM”.
3. Press [MENU].
DISC
CH
DIRECT TUNING
1
23
7
0
89
10
45 6
>
=
INPUT MODE
EFFECT
TONE/
BALANCE
ENTER
DISC
CH
VOLUME
TOP MENU
FUNCTIONS
DIRECT NAVIGATOR
SUB MENU/
PLAY LIST
SUBWOOFER
RETURN
DIRECT TUNING
1
23
7
0
89
10
456
>
=
u
i
MUTING
q
gh
TV VOL TV VOL
/L /R
SKIP
SLOW/SEARCH
STOP PAUSE
PLAY
^^
AV SYSTEMRECEIVER
VCR
-
TUNER/
-
BAND
DVD
DVD
PLAYER
TV
SELECT
DRIVE
RECORDER
ANALOG 6CH
t
y
-
LEVEL/
-
TEST
-
H.BASS/
-
C.FOCUS
REC MODE
REC
DVD REC
TV
-/--
TV/AV
-/--
INPUT SELECTOR
2
2
TUNE
MENU
%DIGITAL
%PL
H. BASS
DOWN
VOLUME
PHONES
UP
2 31
2
2
TUNE
MENU
-
TUNER/
-
BAND
-
TUNER/
-
BAND
Select “FM” or
“AM”.
Select the frequency.
Auto tuning starts if you press
and hold the button.
Press and hold
Select “TUNER”.
To change the AM frequency step
If the correct AM frequency cannot be tuned in, change the
frequency step to suit your area.
On the main unit
1. Press [MENU] to select “AM ALLOC”.
2. Press [TUNE 2 or 1] to select “9” or “10”.
3. Press [MENU].
(The frequency step changes from 9 kHz to 10 kHz.).
SC-HT17EB-EN.fm Page 18 Wednesday, March 9, 2005 10:57 AM