Panasonic CR-W400U Stereo Receiver User Manual


 
5
Fader
Press the knob to select the FADER mode and then turn it
clockwise or counterclockwise to shift the sound volume to the front
or rear speakers.
Mute
Press [MUTE] to mute the sound completely.
Press [MUTE] again to cancel.
Note: In the audio mode (BASS/TRE/BAL/FADE), the display
will return to regular operation mode when there is no input for
more than 5 seconds (2 seconds in the VOL mode).
or R 1 to 15
Fader Center
Balance
Press the knob to select the BALANCE mode and then turn it
clockwise or counterclockwise to shift the sound volume to the right
or left speakers.
or L 1 to 15
Balance Center
Power and Sound Controls
(continued)
(F: Front, R: Rear)
Tone Enhancement (Loudness)
Press and hold [BAND] (LOUD) for more than 2 seconds to
enhance bass and treble tones when listening at low or medium
volume.
Press and hold [BAND] (LOUD) for more than 2 seconds again to
deactivate when listening at higher volumes.
CRW400U
CRW400U
Press and hold
(R: Right, L: Left)