Panasonic CR-W400U Stereo Receiver User Manual


 
14
Electrical Connections
Cautions:
This product is designed to operate with a 12-volt negative ground battery system.
To prevent damage to the unit, be sure to follow the connection diagram below.
Do not insert the power connector into the unit until the wiring is completed.
Be sure to insulate any exposed wires from a possible short-circuit from the vehicle chassis. Bundle
all cables and keep cable terminals free from touching any metal parts.
(Rear Side)
Dimmer Control Lead
Connect to vehicle dimmer control lead
(Red)
ACC
Ground
(Black)
(Yellow)
Battery
Dimmer
(Orange w/White stripe)
Power Connector
(Violet)
(Violet w/black stripe)(Gray w/black stripe)
(Green)
(Green
w/black
stripe)
(White
w/black
stripe)
(Gray)(white)
Left Speaker
(Front)
Right Speaker
(Front)
Left Speaker
(Rear)
Right Speaker
(Rear)
Receiver
CR-W400U
Antenna
Power Lead (ACC or IGN)
To ACC power, +12V DC
Ground Lead
To a clean, bare metallic part of
the vehicle chassis
Battery Lead
To the vehicle battery, continuous
+12V DC