Panasonic CR-W400U Stereo Receiver User Manual


 
17
Specifications
General
Power Supply : 12 V DC (11V-16V) Test Voltage 14.4V, Negative ground
Maximum Power Output : 37W
×
4 channels at 400 Hz, Volume Control maximum
Power Output : 18W per channel into 4 ohms, 40 to 30,000Hz at 3% THD.
Tone Action : Bass; ± 12 dB at 100 Hz
Treble; ± 12 dB at 10 kHz
Current Consumption : Less than 2.5 A (0.5W 4-speaker)
Speaker Impedance : 4 (4-8 acceptable)
Dimensions (W
×
H
×
D) : 7"
×
1-15/16"
×
5-7/8" (178
×
50
×
150 mm)
Weight : 1 lbs. 14 oz. (0.85 k )
AM Radio
Frequency Range : 530-1,710 kHz
Useable Sensitivity : 28 dB/µV (25 µV/ S/N 20 dB)
FM Stereo Radio
Frequency Range : 87.9-107.9 MHz
Useable Sensitivity : 12 dBf. (1.1 µV / 75, S/N 30 dB)
50 dB Quienting Sensitivity : 17 dBf. (1.8 µV / 75)
Frequency Response : 30-15,000 Hz ± 3 dB
Alternate Channel Selectivity : 75 dB
Stereo Separation : 35 dB at 1,000 Hz
Signal/Noise Ratio : 70 dB (Mono)
Weather Band Radio
Frequency Range : 162.40-162.55 MHz
Useable Sensitivity : 3 dB/µV (S/N 20 dB)
Signal/Noise Ratio (40 dB/µV) : 50 dB
*Above specifications comply with EIA standards.
Note: Specifications and design are subject to modification without notice due to improvements in
technology.
This unit has been manufactured under the Part 15 of the FCC Rules.
Do not attempt to make any changes or modifications to this unit.
Part 15 of the FCC Rules