Panasonic GCSEB E Home Theater System User Manual


 
22
RQT7429
Using on-screen menus
Using on-screen menus
(Refer to page 14 for remote control button positions.)
Play Menu
(Only when the elapsed play time can be displayed.
[JPEG]: Works with all JPEG content.)
123 4
Press once.
(When pressed twice, the elapsed
play time indicator appears
below.)
Items shown differ depending on
the type of software.
Select the menu. Make the settings. Press to exit.
DISPLAY
ENTER
Go to the
next menu
Select
Register
Return to the
previous menu
123
456
78
0
9
-/--
S10
ENTER
Select
Register
DISPLAY
Main Menu
Program
Group
Title
Chapter
Track
Playlist
Content
To start from a specific item
Time
To skip incrementally or decrementally
(Time Slip)
1 Press [ENTER] twice to show Time Slip
indicator.
2Press [34] to select the time and press
[ENTER].
Press and hold [34] to alter faster.
To start from a specific time (Time Search)
To change remaining/elapsed time display
Audio
(page 18)
[WMA] [MP3]
To display the current bitrate or sampling
frequency
Still Picture
To switch still picture
Thumbnail
To show thumbnail images
Subtitle
(page 18)
Marker (VR)
[RAM]
To recall a marker recorded on DVD-Video
recorders
To recall a marker: [34] [ENTER]
Angle
(with multiple angles)
To select the angle
Rotate Picture
To rotate pictures
Slideshow
To turn on/off slideshow
To change the slideshow timing (0–30 sec)
Other Settings
Current playback item
Press [34] to select the elapsed
play time or the remaining time.
Condition—play, pause, or slow/search
Current position
Elapsed play time indicator
(Except [JPEG])
Play Speed
[DVD-A] (Motion picture part) [RAM] [DVD-V]
To change play speed
–from k0.6 to k1.4 (in 0.1 unit steps)
After you change the speed
–Output is in stereo.
–Sampling frequency of 96 kHz is converted
to 48 kHz.
Repeat
(page 19)
A-B Repeat
Except [JPEG] [RAM] (Still picture part)
To repeat a specified section
Press [ENTER] at the starting and ending
points. Press [ENTER] again to cancel.
Marker
Except [RAM]
To mark up to 5 positions to play again
[ENTER] (The unit is now ready to accept
markers.)
To mark a position: [ENTER] (at the desired
point)
To mark another position: [21] [ENTER]
To recall a marker: [21] [ENTER]
To erase a marker: [21] [CANCEL]
This feature does not work during program
and random play.
RQT7429-2B book.book 22 ページ 2004年3月4日 木曜日 午前10時36分