Filter
Top Products
12
RQT7429
Video connections
≥Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not display
properly.
≥Turn the television off before connecting, and refer to the
television’s operating instructions.
∫ Television with a VIDEO IN terminal
∫ Television with an S-VIDEO IN terminal
∫ Television with COMPONENT VIDEO IN
terminals
[The\United\Kingdom,\Continental\Europe\and\Russia]
∫ Television with SCART terminal
S-VIDEO OUT terminal
The S-VIDEO OUT terminal achieves a more vivid picture than the
VIDEO OUT terminal by separating the chrominance (C) and
luminance (Y) signals. (Actual results depend on the television.)
COMPONENT VIDEO OUT terminals
These terminals can be used for either interlace or progressive
output and provide a purer picture than the S-VIDEO OUT
terminal. Connection using these terminals outputs the color
difference signals (P
B/PR) and luminance signal (Y) separately in
order to achieve high fidelity in reproducing colors.
≥The description of the component video input terminals depends
on the television or monitor (e.g. Y/P
B/PR, Y/B-Y/R-Y, Y/CB/CR).
Connect to terminals of the same color.
[The\United\Kingdom,\Continental\Europe\and\Russia]
≥When making this connection, select “Video/Y PB PR” or
“S-Video/Y PB PR” from QUICK SETUP (‹ page 14).
SCART (AV) terminal
To improve picture quality, you can change the video signal output
from the SCART (AV) terminal from “Video” to either “S-Video” or
“RGB” to suit the type of television you are using. Select “S-Video/
Y PB PR” or “RGB/No Output” from QUICK SETUP (‹ page 14).
Video cable
STEP4 Video connections
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUT
P
B
P
R
Y
(480P/480I)
VIDEO IN
Television
(not included)
Back of the
main unit
Video cable
(included)
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUT
P
B
P
R
Y
(480P/480I)
IN
S-VIDEO
S-video cable
(not included)
Television
(not included)
Back of the
main unit
COMPONENT
VIDEO IN
PR
PB
Y
COMPONENT
S-VIDEO
OUT
VIDEO
OUT
VIDEO OUT
P
B
P
R
Y
(480P/480I)
Television
(not included)
Video cables
(not included)
Back of the
main unit
AV
AV
Television
(not included)
Scart cable
(not included)
Back of the
main unit
To enjoy progressive video
≥Connect to the component video input terminals on a 480P
compatible television. (Video will not be displayed correctly if
connected to an incompatible television.)
≥When playing NTSC discs, change video output mode to
“480P” (‹ page 23) or press [PROGRESSIVE] on the main
unit so “PROG.” appears on the display.
All Panasonic televisions that have 480P input connectors are
compatible. Consult the manufacturer if you have another
brand of television.
[Note]
Output from this unit is interlace if you have connected to the
television through the VIDEO OUT, S-VIDEO OUT or SCART
(AV) terminal or when playing PAL discs, even if “PROG.” is on
the display.
RQT7429-2B book.book 12 ページ ２００４年３月４日 木曜日 午前１０時３６分