Filter
Top Products
13
English
General
Pressing [DISP] toggles clock display on and off.
Note: The clock appears only at ACC on.
The dimmer level changes as follows every time you hold
down [MENU] (DIM) 2 sec. or more.
CQ-C7300N
BAND
CQ-C7300N
BAND
Clock display (default)
Off
Brighter (Default)
Medium
Darker
The display color changes as follows every time
[COLOR] is pressed.
CQ-C7300N
BAND
Storm (default)
Level
The color varies in
conjunction with sound.
Red
Purple
Blue
Aquablue
Green
Yellow
White
Off
The color varies in conjunction with time.
Clock Display at Power Off
(DISP: Display)
Dimmer Control
(DIM: Dimmer)
Display Color Setting
(COLOR)
General
12
The rear speaker can be used as a substitutional
subwoofer when a subwoofer is not connected.
Holding down [MUTE] (SBC·SW) for 2
sec. or more toggles SBC-SW on and off.
CQ-C7300N
BAND
lights when activated.
Off (default)
On
Substitutional Subwoofer
(SBC-SW: Super Bass Control·Subwoofer)
Open/Eject
Press [] (OPEN).
When a disc is already loaded, the disc will automatically
be ejected.
Close
Press [] (OPEN).
Tilt
The display angle changes among 4 levels as follows
every time you hold down [] (TILT) for 1 sec. or
more and release.
Note: The last selected
angle is maintained even
after turning off the power.
CQ-C7300N
BAND
Front Panel Motion
(OPEN/CLOSE, TILT)
Cautions:
¡To avoid damaging the front panel, do not push it
down or place objects on it while it is open.
¡Do not pinch your finger or hand in the front panel.
¡Do not insert foreign objects into the disc slots.
¡For the following cases, the front panel automati-
cally closes. Use caution not to catch your finger.
¡After a lapse of 20 seconds
¡When a disc is inserted
¡When the face plate is removed (a page 10)
TILT 1
TILT 2
TILT 3
OPEN
Notes:
¡When ON has been selected, the settings resulting
from the adjustments performed at the subwoofer
level and subwoofer low pass filter settings are
reflected in the output. (a page 15)
¡Depending on the speakers used and the type of
music played, it may not be possible to achieve a sat-
isfactory effect.
Note: This setting is not adjustable with the remote
control.