Panasonic AMX 2 Speaker User Manual


 
5
To power the system using batteries, open the
R
speak-
er’s back cover and insert the batteries into the compart-
ment as indicated by the polarity markings (+ and –)
inside. Replace the cover and set the slide switch on the
R
speaker to the battery symbol.
Caution:
Do not mix old and new batteries, different
types of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
To power the system using an AC adapter, connect the
adapter’s 2.1 mm inner diameter/5.5 mm outer diameter
plug to the
R
speaker’s
6VDC
jack, and plug the adapter
into a standard AC outlet. Set the slide switch on the
R
speaker to the adapter symbol.
Caution:
You must use an AC adapter that supplies 6
volts and delivers at least 100 milliamps. Its center tip
must be set to negative, and its plug must correctly fit the
R
speaker’s
6VDC
jack. The recommended adapter
meets these specifications. Using an adapter that does
not meet these specifications could seriously damage the
speakers or the adapter.
OFF
OFF
40-1359.fm Page 5 Tuesday, August 10, 1999 3:03 PM