Filter
Top Products
Installation
INSTALLATION/
CONNECTIONS
17
After switching on your sound system the first
time, the machine waits for time setting.
See page 16
Plug the provided FM antenna here.
Plug the provided AM (MW)antenna here.
Plug a device like a video recorder, TV set,
or minidisc, etc. here.
Be sure to connect sockets and plugs of
the same colour.
Fit the speaker cables.
Be sure to connect the
pair of cables (for the left
and the right speaker) so
that the marked flexes
have both the same
colour (phase).
Right speaker
Make sure the rating of your household electricity supply matches that shown
on the back of the sound system.
Do not stack objects on top of the sound system.
Do not block the ventilation holes of the sound system.
Place the system so that air can circulate freely.
Switch devices off when connecting or disconnecting.
Do not expose the sound system to high levels of humidity and heat, to avoid the risk of fire and
electric shock.
Do not connect the sound system to the power supply if you have just moved it from a cold to a
warm environment. This can result in condensation inside the system and cause serious
damage to the machine and cassettes. Wait around two hours to allow it to reach room
temperature.
Be sure you disconnect the power supply and aerial if you will not be using the system for a
long period or during a thunderstorm.
Be sure to read the precautions on page 2.