Filter
Top Products
Displaying the time
Setting the clock
CONTROLS
14
Setting the sleep timer
FUNCTION
Power save mode is activated by power button after clock setting.
CLOCK
SLEEP
SLEEP
Switch off your sound
system*.
Enter clock-set mode, the hour
and minute digits flash.
Set the current hour.
Switch to the minute digits.
Set the current minutes.
Start the clock and exit
clock set.
The machine shows the time
for approx. 4 seconds.
You can set the machine to
automatically switch off after a
specified time
Select the SLEEP function.
Each time you press the
button, you cut off time from
90 minutes down to 10
minutes (then off).
If you want to cancel the SLEEP function. Dress the button till "SLEEP"
disappears from the display.
* Only if the clock was set before.
TUNE TUNE
TUNE TUNE