Filter
Top Products
Recording from another tape (dubbing)
Recording CDs with synchro start
RECORDING
13
TAPE 1: Only to playback prerecorded tapes.
TAPE 2: To playback prerecorded tapes and
to record tapes
If the tape is not rewound completely, rewind it first.
If you want to start at the current position, press REC button.
Use only good quality tape cassettes.
Keep cassettes away from excessive moisture or dust, magnetic and electrical fields
(loudspeakers and computer monitors, for example)
Always wind the tape to the beginning when you have finished.
Store the cassette in its cover.
You can protect your precious recordings from being wiped by breaking out the safety tab on the
side of the cassette.
Should you wish to re-use the tape after removing the tab, cover the hole with adhesive tape.
The synchro start function gives you a very comfortable way of copying (tracks of) CDs to a tape: One
press of a button starts both CD playing and tape recording at the right time.
Open the disc compartment to load a disc.
Select the disc you want to record.
CLEAR
Stop CD play before recording start.
TUNE DOWN TUNE UP
To find a track to be recorded.
Start your recording.
SYNC-DUB
CLEAR
Stop your recording.
Select the TAPE function.
buttons on the machine
PUSH
OPEN
Load a tape with enough free recording time into
TAPE 2.
Load the prerecorded tape (the one to be dubbed)
into TAPE 1.
Start your dubbing by selecting dubbing speed:
"Hi-DUB" dubs with double speed = half the time
"DUB" dubs with normal tape speed.
Press repeatedly.
SYNC-DUB
CLEAR
Stop your recording.
buttons on the machine
Select the CD function.
CD
OPEN/
CLOSE
CD1 CD2 CD3
TAPE 1/2