Sylvania SRCD858 CD Player User Manual


 
REMOTE CONTROL
BATTERY INSTALLATION
Insert 2 R03S (AAA or equivalent) size batteries into the battery compartment of the
remote control and replace the cover (Batteries are not included).
BATTERY REPLACEMENT
When the batteries become too weak, the operating distance of the remote control is
greatly reduced and you will need to replace the batteries.
Note: To maintain the accuracy and long life of the transmitter, do not press two
or more Buttons simultaneously.
If the remote control is not to be used for a long time, remove the batteries
to prevent possible damage through leaking batteries.
Do not mix different types of batteries, or old batteries with new ones.
USING THE REMOTE CONTROL CORRECTLY
Point the remote control at the Remote Sensor.
The functions of the Buttons on the remote control are the same as the corresponding
controls on the main unit.
When there is a strong ambient light source, the performance of the infrared Remote
Sensor may be degraded, causing unreliable operation.
The maximum effective distance for remote control operation is about 5 metres (16.5 feet).
MUTE
Press the MUTE Button on the remote control to switch off the sound, (the MUTE
indicator will light up).
Press MUTE again to restore the sound to the previous level ( the MUTE indicator will
go off.
1. STANDBY Button
2. STOP Button
3. PLAY / PAUSE Button
4. CD SKIP Buttons
5. PROGRAM Button
6. DISC SKIP Button
7. MUTE Button
8. VOLUME UP/DOWN Buttons.
- 13 -