Filter
Top Products
Notes: The
&
Buttons can be used to select a desired track to play before
disc play starts. In this case the number of the selected track will be displayed until the
Play/Pause Button is pressed.
DISC SKIP
To skip to the next disc simply press the DISC SKIP Button. The unit will cycle
through position 1 - 2 - 3 - 1 - 2 . . . . . .etc
REPEAT DISC PLAY
If the REPEAT Button is pressed during normal or programmed disc play the following
repeat functions are displayed in sequence in the CD Display.
REPEAT ALL DISC Repeats All the Tracks on All the Discs
REPEAT 1 DISC Repeats all the tracks on the Current disc.
REPEAT 1 Repeats the current track on the Current disc.
To cancel a repeat mode, keep pressing the REPEAT Button until the REPEAT Indicator
disappears.
PROGRAMMED DISC PLAY
It is not possible to enter programs during disc play. Press the STOP Button first,
then follow the instructions below.
ENTERING A PROGRAM
1. Press the PROGRAM Button and the CD Display will display the word
Progam edit and 01 d:--
2. Select the disc that the first track is on using the Disc Skip Button.
3. Select the desired track using the Track skip buttons until the desired track
is reached and the display will show Progam edit and 01 d2:04.
4. Press the PROGRAM Button once again and the selected disc and track
number is then stored in memory. The CD Display will change to Progam
edit and 02 d2:--
5. Repeat steps 2 - 4 to enter additional tracks. You can store up to 32
programs in memory.
Notes: If the PLAY/PAUSE Button is pressed before the PROGRAM Button is
pressed to store a track, the track will not be programmed and the disc
will start playing from the first selected track.
Any track can be programmed to play more than once.
If you press the STOP Button during PROGRAM mode, the entire program
will be erased from memory.
- 10 -