- 7 -
Using the cassette player
Inserting/removing
cassettes
• Set the Function Selector to Tape.
• Press the Stop/Eject button to open the
cassette door.
• Slide the cassette tape into the door with
the exposed section of tape facing upwards.
• Push the cassette door closed.
• To remove a cassette, press the Stop/Eject
button to open the door and lift out your
tape.
Playing cassettes
• Once you have inserted a tape, press the
Play button.
• Press the Pause button to stop playback
temporarily.
• Press the Fast Fwd button to fast forward
through the tape.
• Press the Rewind button to go backwards
through the tape.
• Press the Stop/Eject button when finished.
Recording
Cassette player has “ Automatic Level
Control” which automatically sets the
recording level for optimum performance.
The volume control will not affect the
recording level.
To record from the radio
• Set the Function Selector to Radio and
tune in the AM/FM station you want.
• Insert your cassette tape.
• To start recording, press the Record and
Play buttons at the same time. The
recording level is set automatically.
• To stop recording, press the Stop/Eject
button.
To record from a CD
• Set the Function Selector to CD.
• Insert the CD you want to record.
• Insert your cassette tape.
• To start recording, press the Record and
Play buttons at the same time.
• Press CD Play/Pause button.
The recording level is set automatically.
• To stop recording, press the cassette Stop/
Eject button.