Filter
Top Products
- 9 -
Prevention of Accidental Erasure
To prevent erasing a recorded tape accidentally,
break off the tabs on the rear of the tape as
shown.
Recording on this side is no longer possible.
You can stop this being effective by covering
the hole with a piece of adhesive tape.
Technical specifications
Power supply
AC 120V~60Hz
Batteries 6 x UM2 LR14 “ C “ Size (batteries not included)
Radio frequency coverage
FM 87.5 - 108 MHz
AM 530 - 1710 KHz
CD player
Pick Up 3-beam, Semi-conductor Laser
Encodin 1 Bit DA Converter
8 x Oversampling
Recording system DC Bias
Erasing system Magnetic Erase
General
Speaker 8 Ohms
Headphones 3.5mm stereo jack plug, 8-32 Ohms (headphones not included)