Optimus SWS-250 Speaker System User Manual


 
4
To a Microphone
You can connect a microphone (not
supplied) directly to the
MIC
jack on
the front of the system.
Notes:
The microphone signal is routed
from the
MIC
jack on the front
directly to the
MIC
jack on the
back of the system.
For this connection to work, you
must also connect a shielded
audio cable with a
1
/
8
-inch stereo
plug at each end (such as Cat.
No. 42-2387, not supplied)
between the
MIC
output jack on
the back of the system and the
MIC input jack on your computer’s
sound card (see “To the Micro-
phone Input of a Computer’s
Sound Card”).
To Satellite Speakers
Connect the left satellite speaker’s
wires to the system’s
SATELLITE
SPEAKER L
terminal (white to + and
black to –).
Connect the right satellite speaker’s
wires to the system’s
SATELLITE
SPEAKER R
terminal
(white to + and
black to –).
Note:
For the best overall perfor-
mance, be sure you connect the satel-
lite speaker wires according to the
correct polarity (+ and –).
To Headphones
For private listening, you can connect
a pair of stereo headphones with a
1
/
8
-
inch plug (not supplied) to the
PHONES
jack on the front of the sys-
tem.
(illus)
(illus)
(illus)
40-4075.fm Page 4 Wednesday, August 11, 1999 10:33 AM