Filter
Top Products
3
Connect the Y-adapter cord’s
1
/
8
-inch
stereo plug to the
1
/
8
-inch stereo out-
put jack on your computer’s sound
card. Then connect the Y-adapter
cord’s right (red) and left (white)
phono plugs to the system’s
R
(red)
and
L
(white)
Input A
phono jacks.
To the Audio Output of a
Portable or Home Stereo
System
You can connect the system to a por-
table stereo source (such as a CD
player or cassette player) using a
shielded audio cable with a
1
/
8
-inch
stereo plug at each end (such as Cat.
No. 42-2387, not supplied).
Connect one end of the cable to the
input source’s
1
/
8
-inch stereo LINE
OUT or headphone jack.
• If you use the input source’s LINE
OUT jack, the source’s volume
control has no effect.
• If you use the input source’s head-
phone jack, set the input source’s
volume control to its middle set-
ting.
Then connect the cable’s other end to
the system’s
Input B
jack on the back
panel.
Note:
If you are not connecting the
system to a computer sound card, you
can use the supplied Y-adapter cord
between the portable audio source’s
LINE OUT or headphone jack and the
system’s
R
and
L
Input A
phono jacks.
Or, using a shielded audio cable with
left and right phono plugs at each end
(such as Cat. No. 42-2356, not sup-
plied), you can connect the system
between your home audio source’s
right and left AUDIO OUT jacks and
the system’s
R
and
L
Input A
phono
jacks.
(illus)
(illus)
(illus)
(illus)
40-4075.fm Page 3 Wednesday, August 11, 1999 10:33 AM