Filter
Top Products
9
Recording from the Radio
1. Load a blank tape, or one you
want to record over, into Deck 2.
2. Set
TAPE (POWER OFF)/RADIO
to
RADIO
.
3. Set
AM/FM/-STEREO
to the de-
sired band and rotate
TUNING
to
tune to the desired station.
Note:
Sometimes, AM broad-
casts produce a whistling sound
that you can hear while playing a
recording. If you hear this sound,
set
DUBBING MIC/NORM/HIGH
to
HIGH
(AM BEAT CUT) to help
reduce or eliminate it.
4. Press
RECORD
on Deck 2.
RECORD
and
PLAY
both lock
down.
Note:
Press
PAUSE
on Deck 2 to
temporarily stop recording. Press
PAUSE
again to resume recording.
5. When you are finished, press
STOP/EJECT
on Deck 2 to stop the
tape.
RECORD
and
PLAY
release.
Note:
The deck automatically stops
when the tape reaches the end.
Making a Live Recording
You can use the built-in microphone to
make a live recording.
1. Load a blank tape, or one you
want to record over, into Deck 2.
2. Set
DUBBING MIC/NORM/HIGH
to
MIC
.
3. Set
TAPE (POWER OFF)/RADIO
to
TAPE (POWER OFF)
.
4. Place the system 2-3 feet from the
live recording source.
5. Press
RECORD
on Deck 2.
RECORD
and
PLAY
both lock
down.
14-703.fm Page 9 Wednesday, June 30, 1999 4:56 PM