Filter
Top Products
14
4. While pressing and holding down
the erase-protection tab sensor
inside Deck 2, press
RECORD
on
Deck 2.
RECORD
and
PLAY
on
Deck 2 both lock down. This
exposes Deck 2’s record/playback
head and erase head.
5. Use a cotton swab dipped in
denatured alcohol or tape head
cleaning solution to clean the
record/play heads, tape guides,
pinch rollers, capstans, and erase
head.
6. When you finish cleaning, press
STOP/EJECT
on Deck 1 and Deck
2, then close both cassette com-
partment doors and reconnect
power.
Your local RadioShack store has a
complete line of cassette deck clean-
ing supplies.
THE FCC WANTS YOU
TO KNOW
Your system might cause TV or radio
interference even when it is operating
properly. To determine whether your
system is causing the interference,
turn off your system. If the interfer-
ence goes away, your system is caus-
ing the interference. Try to eliminate
the interference by:
• Moving your system away from
the receiver.
• Connecting your system to an out-
let that is on a different electrical
circuit from the receiver.
• Contacting your local Ra-
dioShack store for help.
If you cannot eliminate the interfer-
ence, the FCC requires that you stop
using your system.
14-703.fm Page 14 Wednesday, June 30, 1999 4:56 PM