Filter
Top Products
9
Using Vehicle Battery Power
To power the SCP-86 from your vehicle’s battery,
you need a DC adapter, such as Cat. No. 270-1560.
Cautions:
• You must use a DC adapter that supplies 3 volts
DC power and delivers at least 200 milliamps. Its
center tip must be set to negative, and its plug
must properly fit the SCP-86’s
DC 3V
jack. The
recommended adapter meets these require-
ments. Using an adapter that does not meet
these requirements could damage the SCP-86.
• Be sure you plug the adapter into the SCP-86
before you plug it into the cigarette-lighter
socket, and that you unplug the adapter from the
cigarette-lighter socket before you unplug it from
the SCP-86, to prevent damage to the SCP-86
or the adapter.
14-1227.fm Page 9 Friday, July 2, 1999 4:20 PM