Filter
Top Products
18
CHANGING THE TAPE
DIRECTION
You can change the tape’s direction using the
FWD/
REV
switch. To listen to the tape’s forward side (fac-
ing out), set the switch to
FWD
. To listen to the tape’s
reverse side (facing in), set the switch to
REV
.
DOLBY NOISE REDUCTION
Your cassette player uses the Dolby B Noise-Reduc-
tion system to reduce background noise or tape hiss
on your tapes. When a Dolby-encoded tape is re-
corded, the Dolby circuit listens to the program mate-
rial to find soft passages where you might later be
able to hear the tape noise. The Dolby NR system in-
creases the recording level during these passages.
When you play the tape, the circuit reduces the vol-
ume of these passages to their original levels and re-
duces the level of tape hiss to as little as one-third of
the usual noise level.
14-1227.fm Page 18 Friday, July 2, 1999 4:20 PM