Filter
Top Products
8
• Be sure you connect the adapter to the SCP-86
before you plug it into the AC outlet and that you
unplug the adapter from the AC outlet before you
unplug it from the SCP-86, to prevent damage to
the SCP-86 or the adapter.
Follow these steps to connect the SCP-86 to AC
power.
1. Set the adapter’s voltage switch to 3V.
2. Insert the adapter’s 3.4 mm outer diameter/1.3
mm inner diameter barrel plug into the adapter’s
cord, with the tip set to negative.
3. Insert the plug into the SCP-86’s
DC 3V
jack.
4. Plug the adapter into a standard AC outlet.
Note:
Connecting the AC adapter automatically dis-
connects the internal batteries.
14-1227.fm Page 8 Friday, July 2, 1999 4:20 PM