Filter
Top Products
6
Important: Do not cut these wires. If
you cut any wire, you cannot obtain a
refund or exchange on this product.
However, your local RadioShack
store
will
provide warranty service if
you cut a wire and find the product is
defective.
You might need additional wire, de-
pending on your individual auto-
sound system, to complete the
connections. Your local RadioShack
store carries a full line of wire and
wire management accessories.
Cautions:
• For added safety and to protect
your stereo, disconnect the
cable from your vehicle’s nega-
tive (–) battery terminal before
you begin.
• Be sure your speakers can han-
dle 8 watts of power (4 watts per
channel). Each speaker must
have an impedance of at least 4
ohms. Your local RadioShack
store carries a full line of speak-
ers.
• You must connect the
GROUND
(–)
,
POWER LEAD (B+)
, and
CLOCK MEMORY
wires first, then
make all other connections as
described in the following sec-
tions before you plug the har-
ness with the 14-pin connector
into the stereo. If you do not
make connections in the order
shown, damage to the stereo is
possible if any wire connections
are made incorrectly.
• You must connect a separate
wire to each speaker terminal as
described in the following proce-
dure. Do not use a common wire
or chassis ground for any
speaker connection.
Note: The wires in the wiring har-
ness have the following colors and
labels.
Wire
Harness
Black
Red
Blue/
Yellow
CLOCK MEMORY
AMP REMOTE TURN ON
POWER LEAD (B+)
GROUND (–)
White
White/Black
Gray
Gray/Black
White
500 MA MAX
SPEAKER RIGHT
SPEAKER
LEFT
12-2114.fm Page 6 Wednesday, July 14, 1999 12:35 PM