Filter
Top Products
18
5. Press
RECORD
on Tape 1. Both
RECORD
and
PLAY
lock down. The
CD starts playing and Tape 1 begins
recording from the CD.
Notes:
• You can listen to the CD as you
record.
• If you want to skip an unwanted
section during recording, you can
temporarily stop recording by
pressing
PAUSE
on Tape 1 while
the unwanted section plays. To
resume recording, press
PAUSE
on Tape 1.
6. The tape automatically stops when it
reaches the end. To stop the CD
player, press
STOP
. To stop record-
ing before the tape reaches the end,
press
STOP/EJECT
.
Recording from the Radio
1. Load a blank tape, or one you want
to record over, in Tape 1.
2. Press
POWER
to turn on the system.
The POWER indicator lights.
3. Set
FUNCTION
to
TUNER
.
4. Set
BAND
to
AM
,
FM
, or
FM STEREO
.
5. Press
RECORD
on Tape 1 to begin
recording. Both
RECORD
and
PLAY
lock down.
Note:
To skip an unwanted section
during recording, temporarily stop
recording by pressing
PAUSE
on
Tape 1 while the unwanted section
plays. To resume recording, press
PAUSE
on Tape 1.
6. The tape automatically stops when it
reaches the end. To stop recording
before the tape reaches the end,
press
STOP/EJECT
on Tape 1.
Dubbing a Cassette Tape
Follow these steps to dub (copy) from
one cassette deck to the other, one side
at a time.
1. Load the prerecorded tape you want
to copy from into Tape 2 with the
side you want to copy facing you,
the exposed tape edge down and
the full reel to the left.
2. Load a blank tape, or one you want
to record over, in Tape 1 with the
side you want to record on facing
you and the full reel to the left.
3. Press
POWER
to turn on the system.
The POWER indicator lights.
4. Set
FUNCTION
to either
TAPE DUB-
BING HIGH
or
TAPE DUBBING
NORM
.
illus
14-546a.fm Page 18 Wednesday, April 7, 1999 6:57 AM