Filter
Top Products
17
Using Pause
Press
PAU SE
to temporarily stop play.
Press
PAUSE
again to resume play.
RECORDING
You can record from the CD-3321’s CD
player or radio, or another tape.
Notes:
• The CD-3321’s Automatic Level
Control (ALC) automatically ad-justs
the recording level.
VOLUME
and
E-
BASS
have no effect on recording.
• Tape quality greatly affects the qual-
ity of the recording. We recommend
regular length (60- or 90-minute)
cassette tapes. We do not recom-
mend long-play cassette tapes such
as C-120s because they are thin
and can easily tangle. For low-noise,
wide-range recordings, use normal-
bias tape.
• Before you load a cassette tape for
recording, turn the cassette’s hub
with your finger or a pencil to move
the tape past its leader.
• Before recording, be sure the erase-
protection tabs are in place on the
cassette tape you are using to
record. See “Preventing Accidental
Erasure” on Page 19.
Caution:
If you try to record on a
cassette tape that has had the
erase-protection tabs removed, you
cannot press down
RECORD
. Do not
force it, as this can damage the
mechanism.
Recording from the CD Player
1. Press
POWER
to turn on the system.
The POWER indicator lights.
2. Set
FUNCTION
to
CD
and load a CD.
Notes:
• If you do not want to begin record-
ing with the first track, press
SKIP
|
or
|
to find the desired
track.
• To record a programmed
sequence, follow the steps in
“Programmed Play” on Page 12 to
store the tracks first.
3. Turn the hub of a blank tape (or one
you want to record over) with a pen-
cil to advance past the clear leader,
then load the tape in Tape 1.
4. Press
PLAY/PAUSE
on the CD player
twice to pause the CD. appears.
illus (arrow
shouldn’t
cover PLAY)
14-546a.fm Page 17 Wednesday, April 7, 1999 6:57 AM