Filter
Top Products
7
CONNECTING AN
EXTERNAL ANTENNA
Your System 741 has two built-in an-
tennas. The AM antenna is internal,
and the power cord serves as the FM
antenna.
For improved reception, you can at-
tach an external FM or VHF TV anten-
na (not supplied) to the 75-ohm or
300-ohm terminals on the back of the
system.
Note:
If you use an outside VHF TV
antenna, you can use a signal splitter
to connect your radio and TV to the
same antenna.
Your local RadioShack store has a
wide selection of antennas, splitters,
and connectors.
CONNECTING POWER
After making all other connections,
plug your system’s AC power cord into
a standard AC outlet.
Caution:
Your system’s power cord
has a polarized plug (one blade is wid-
er than the other). If you have difficulty
inserting the plug into the outlet, do
not force it. Turn the plug over and try
again.
Note:
If you are not connecting an ex-
ternal antenna, make sure the sys-
tem’s power cord is fully extended.
(il-
(il-
13-1288.fm Page 7 Wednesday, July 14, 1999 6:02 PM