Filter
Top Products
18
Dubbing a Cassette Tape
You can dub at the tape’s normal play-
ing speed or at twice the normal
speed. If you dub at normal speed,
you can listen as you record.
1. Press
TAPE
.
2. Load the pre-recorded cassette
you want to record from into TAPE
1. Be sure the side you want to
record from is facing you.
3. Load a blank cassette (or one you
want to record over) into TAPE 2
with the side you want to record
on facing you.
4. Set
DUBBING
to
NORMAL
or
HIGH
.
•Set
DUBBING
to
NORMAL
to
dub at normal speed. This pro-
duces the highest quality
results.
•Set
DUBBING
to
HIGH
to dub at
approximately twice the normal
speed. This produces the fast-
est results, but the quality is
slightly reduced.
5. Press
PAUSE
and
RECORD
on
TAPE 2. Both
PAUSE
and
RECORD
lock down.
6. Press
PLAY
on TAPE 1. TAPE 1
begins playback,
PAUSE
releases
on TAPE 2, and dubbing begins.
Notes:
• To skip an unwanted section on
TAPE 1, press
PAUSE
on TAPE
2 while the unwanted section
plays. To resume dubbing,
press
PAUSE
again.
• To monitor the tape you are
copying, adjust
VOLUME
.
Dubbing automatically stops when the
cassette in TAPE 2 reaches its end.
If the cassette in TAPE 1 continues to
play, press
STOP/EJECT
. To stop dub-
bing before TAPE 2 stops automati-
cally, press
STOP/EJECT
on both
cassette compartments.
(il-
13-1288.fm Page 18 Wednesday, July 14, 1999 6:02 PM