Filter
Top Products
20
USING AN EXTERNAL AUDIO SOURCE
If you connected an external audio
source, such as a TV, VCR, or an ex-
ternal CD player or cassette deck, you
can use your System 741 to listen to
or record audio from that source.
LISTENING TO AN
EXTERNAL AUDIO
SOURCE
1. Turn
VOLUME
to
MIN
, and make
sure the external audio source’s
volume control (if any) is also set
to its lowest level.
2. Press
AUX
. The AUX indicator
lights.
3. Start playback on the external
audio source.
4. Adjust
VOLUME
,
BALANCE
, and
the
3-BAND FREQUENCY EQUAL-
IZER
for the desired sound.
5. Press
E-BASS
to boost low fre-
quency sounds for an emphasized
bass sound.
RECORDING FROM AN
EXTERNAL AUDIO
SOURCE
Note:
The
VOLUME
,
E-BASS
,
BAL-
ANCE
, and
3-BAND FREQUENCY
EQUALIZER
settings do not affect your
recordings. The system automatically
adjusts those levels.
1. Turn
VOLUME
to
MIN
, and make
sure the external audio source’s
volume control (if any) is also set
to its lowest level.
2. Press
AUX
. The AUX indicator
lights.
3. Insert a cassette you want to
record on into TAPE 2.
4. Press
RECORD
to begin record-
ing.
5. Start playback on the external
audio source.
Note:
To pause the tape during
recording, press
PAUSE
. To
resume recording, press
PAUSE
again.
6. To stop the tape at any time dur-
ing recording, press
STOP/EJECT
.
7. Stop playback on the external
audio source.
(il-
13-1288.fm Page 20 Wednesday, July 14, 1999 6:02 PM