Onkyo TX-SR500 Home Theater System User Manual


 
http://www.onkyo.co.jp/
HOMEPAGE
SN 29343287
W0202-1
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8111 Fax: 072-833-5222
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 E-mail: onkyo@onkyousa.com
ONKYO EUROPE ELECTRONICS GmbH
Industriestrasse 20, 82110 Germering, GERMANY
Tel: 089-849-320 Fax: 089-849-3265 E-mail: info@onkyo.de
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
E
The power is turned
on but no sound is
heard.
The power is not
turned on, and no
sound is heard.
If no sound is heard
Refer to the following table for the cause and corrective action. There may be a problem with a connected device. Refer to the user’s guide of
the connected device and make sure that all connections have been made correctly.
The input signal format does not match
the audio selection (PCM, DTS, or
Multich).
The speaker select switch setting is
incorrect.
The MUTING indicator flashes.
Connections are incorrect.
The power is disconnected from the
AC outlet.
External noise has affected the internal
CPU.
Check the connector being used and select an
appropriate audio option (Auto or Analog).
(See page 28 of the main manual.)
Match the speaker select switch setting to the speakers
you are using.
(See page 26 of the main manual.)
Press the MUTING button to turn off the MUTING
indicator.
(See page 26 of the main manual.)
Make sure that all connections are made correctly.
(See pages 10-16 of the main manual.)
Plug the power cable to the AC outlet securely.
Unplug the power cable from the AC outlet, wait five
seconds, then plug it again.
Enjoying the FM/AM radio
1.
Make sure that the power to the TX-SR500 has been turned on, and the antenna
connections have been made correctly. (See pages 14 and 15 of the main manual.)
Also, make sure that broadcast stations have been programmed as presets. (See
page 25 of the main manual.)
2.
Set the Input Select to TUNER (FM or AM).
3.
Select the desired preset station.
4.
Adjust the volume and tonal quality.
4.
VOLUME
5/
2.
TUNER
3.
PRESET
/£