Filter
Top Products
REMOTE
CONTROL
R
L
R
L
IN
IN
IN
COAXIAL
OPTICAL
12
IN
IN
IN
IN
FRONT
SURR
CENTER
SUB
WOOFER
VIDEO 2
VIDEO 1
OUT
OUT
OUT
DIGITAL INPUT
VIDEO 2
VIDEO 1
DVD MONITOR
OUT
VIDEO
S VIDEO
DVD
TAPE
CD
FRONT
SPEAKERS A
F
R
S
P
L
R
L
R
ANTENNA
FM
75
AM
SUBWOOFER
PRE OUT
5.
CD
3.
STANDBY
/
ON
8.
DSP
6.-2.
CD
7.
VOLUME
5/∞
4.
SP A/
SP B
Enjoying Audio Compact Discs (CDs)
1.
Make sure that connections have been made correctly for the CD Player.
Here, only the typical connections are shown. For details, see page 10 of the main
manual.
Digital audio output (optical)
:Signal flow
Analog audio output
CD player (CD)
L (White)
R (Red)
The STANDBY indicator lights up.
The STANDBY indicator turns off, and the display area lights up.
2.
Connect the power cord to a wall outlet.
3.
Turn on the power.
4.
Select the speaker system(s) to be used.
5.
Set the Input Select to CD.
Wall outlet
8.
Select the listening mode.
When the digital output from CD player is connected to the OPTICAL 1 or
COAXIAL input jack of this unit, change the assignment of digital inputs to
input sources by referring to “Setting the digital inputs” on page 22.
6.
Play a CD.
To control an Onkyo CD player
1 Make z connection (see page 16 of the main manual).
2 Press CD, then press the desired operation button (see page 35 of the main manual).
, £, 7, ¡, 1, 8, 4, ¢, DISC and numeric buttons can be used.
7.
Adjust the volume.
For details, see pages 30-32 of the main manual.