Filter
Top Products
REMOTE
CONTROL
IN
IN
IN
COAXIAL
OPTICAL
12
IN
IN
IN
IN
FRONT
SURR
CENTER
SUB
WOOFER
VIDEO 2
VIDEO 1
OUT
OUT
OUT
DIGITAL INPUT
VIDEO 2
VIDEO 1
DVD MONITOR
OUT
VIDEO
S VIDEO
DVD
TAPE
CD
L
R
L
R
ANTENNA
FM
75
AM
SUBWOOFER
PRE OUT
1.
Make sure that connections have been made correctly for the monitor TV and the
DVD Player.
Here, only the typical connections are shown. For details, see pages 10 and 11 of the main
manual.
7.
VOLUME
5/∞
5.
DVD
3.
STANDBY
/
ON
8.
DSP
6.-2.
DVD
4.
SP A/
SP B
Enjoying DVD
DVD player (DVD)
:Signal flow
Video input
S Video input
Video output
TV
S Video output
Digital audio output
(coaxial)
Analog audio
output
The STANDBY indicator lights up.
The STANDBY indicator turns off, and the display area lights up.
2.
Connect the power cord to a wall outlet.
3.
Turn on the power.
4.
Select the speaker system(s) to be used.
5.
Set the Input Select to DVD.
Wall outlet
6.
Play a DVD.
The video appears on the monitor TV.
To control an Onkyo DVD player
1 Make z connection (see page 16 of the main manual).
2 Press DVD, then press the desired operation button (see page 34 of the main manual).
, £, 7, ¡, 1 , 2/8, 4, ¢, DISC, TOP MENU, MENU, RETURN,
SETUP, 5, ∞, 2, 3, ENT and numeric buttons can be used.
7.
Adjust the volume.
8.
Select the listening mode.
When the digital output from the DVD player is connected to the OPTICAL
1 or 2 input jack of this unit, change the assignment of digital inputs to input
sources by referring to “Setting the digital inputs” on page 22.
For details, see pages 30-32 of the main manual.
• To enjoy multi channel input, see page 23 of the main manual.