Filter
Top Products
Advanced Settings (Setup Menu)
En-17
1� TV Out
TV Out
Make settings for the on-screen display function on the TV when you use the setting menu,
for example.
Setting Item Default Value Setting Details
OSD Language English Select the on-screen display language.
Select from English, German, French, Spanish,
Italian, Dutch, Swedish, Russian (European,
Australian and Asian models), or Chinese
(European, Australian, Taiwanese and Asian
models).
Impose OSD On Set whether or not to display the information on
the TV when the volume is adjusted or input is
changed, for example.
"On": OSD displayed on the TV.
"Off": OSD not displayed on the TV.
● OSD may not be displayed depending on the
input signal even if "On" is selected. If the
operation screen is not displayed, change the
resolution of the connected device.
Screen Saver 3 minutes Set the time to start the screen saver. Select
a value from "3 minutes", "5 minutes", "10
minutes" and "Off".
2� Speaker
Allows you to change the speaker configuration such as presence or not of subwoofer,
crossover frequency, and so on. Settings are automatically configured if you use the
Automatic Speaker Setup.
This setting cannot be selected if headphones are connected or audio is output from the
speakers of the TV.
Configuration
Change speaker settings such as the number of channels connected, and the type of height
speakers connected.
Setting Item Default Value Setting Details
Speaker Channels 7.1 ch Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch",
"7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or
"5.1.2 ch" to suit the number of speaker channels
connected.
Subwoofer Yes Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Height Speaker Front High Set the speaker type if height speakers are
connected to the BACK/HEIGHT terminals.
Select "Front High", "Top Front", "Top Middle", "Top
Rear", "Rear High", "Dolby Speaker (Front)", or
"Dolby Speaker (Surr)" according to the type and
layout of the connected speakers.
● If an item cannot be selected even though
connection is correct, check that the settings
in "Speaker Channels" matches the number of
connected channels.