Filter
Top Products
15
Step 3:
Playing Back
Screen Centered Dialog: Height speakers are used to
move acoustic images such as dialogs from the center
speakers upward according to the height of the TV
screen. Acoustic images of the center speakers move
up as the set value is increased.
r This item may not be available depending on the
selected listening mode.
r This function cannot be used if headphones are connected.
r This function cannot be used if "Height 1 Speakers
Type" is not set to "Front High".
Speaker Layout: You can give priority to surround back
speakers, height 1/2 speakers or wide speakers when
they are all connected.
Back+Height 1: Audio outputs from surround back
speakers and Height 1 speakers are given priority.
Back+Wide: Audio outputs from surround back
speakers and wide speakers are given priority.
Height 1+2: Audio outputs from Height 1 speakers
and Height 2 speakers are given priority.
"Back" and "Height 1": Displayed when Zone 2
playback is performed via Height 2/ wide speaker terminals
(ZONE 2 terminals) while surround back and Height 1
speakers are connected. "Back" means that audio outputs
from surround back speakers are given priority.
"Height 1" means that audio outputs from Height 1
speakers are given priority.
"Back" and "Wide": Displayed when speakers are bi-
amp connected or Zone 3 playback is performed via
Height 1 speaker terminals (ZONE 3/Bi-AMP terminals)
while surround back and wide speakers are connected.
"Back" means that audio outputs from surround back
speakers are given priority. "Wide" means that audio
outputs from wide speakers are given priority.
"Back" and "Height 2": Displayed when speakers
are bi-amp connected or Zone 3 playback is
performed via Height 1 speaker terminals (ZONE 3/
Bi-AMP terminals) while surround back and Height
2 speakers are connected. "Back" means that audio
outputs from surround back speakers are given
priority. "Height 2" means that audio outputs from
Height 2 speakers are given priority.
r Selectable items vary depending on the playing conditions
such as input source, speaker configuration etc.
r The speakers cannot be selected if they have been
set to "None" in "Speaker Configuration".
r This function cannot be used if "11ch Playback" is set
to "Yes".
r This function cannot be used in the listening mode
which does not use surround back speakers, height
1/2 speakers or wide speakers.
r This function may not be effective depending on the
selected listening mode or input source.
Video:
Monitor Out: The video input signals input to the unit
will be converted by the unit when they are output from
the HDMI OUT jack to the TV so that their resolution can
match that of the TV used. Select the HDMI OUT jack to
be used for output.
Control Monitor: Select the main room TV or the
separate room TV for which the CEC link function is
enabled when HDMI connection between the unit and
the separate room TV is established by Zone function.
r For details on Zone function, see the next section
"Using the multi-zone function".
Wide Mode: You can set the aspect ratio.
Picture Mode: You can adjust the image quality. "Cinema"
will automatically adjust the image to be suitable to watch
movie and "Game" suitable to play game. In "Standard",
the resolution will be changed but the image quality will
not be adjusted. In "Custom", "ISF Day" and "ISF Night",
you can adjust the brightness, contrast, hue and saturation
as desired. If you do not adjust the resolution and image
quality, select "Bypass".
r "Video" cannot be selected if the input is "NET", "USB" or
"BLUETOOTH".
Information:
Audio: Displays the audio input source, format, number of
channels, sampling frequency, listening mode, number of
output channels, and other audio information.
Video: Displays the video input source, resolution, signal
format, color tone, 3D information, Aspect, Picture Mode,
output, and other Video information.
Tuner: Displays the band, frequency, preset number, and
other tuner (radio) information.
Listening Mode: Select the listening mode from the
categories of "MOVIE/TV", "MUSIC", "GAME" and "THX".
r It cannot be set when audio is played from the TV's speakers.