Filter
Top Products
39
Listening to the Radio
With the built-in tuner, you can enjoy AM and FM radio
stations.
■
AM Frequency Step Setup
(not North America and Europe)
You must specify the AM frequency step used in your
area. Note that when this setting is changed, all radio
presets are deleted.
Tuning into AM/FM Radio Stations
■
Auto Tuning Mode
■
Manual Tuning Mode
The American model changes FM frequency in 0.2 MHz
steps, 10 kHz steps for AM. For other models it’s
0.05 MHz steps for FM and 9 kHz (or 10 kHz) steps for
AM.
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator also appears.
Tuning into Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Note:
•You can also use the remote controller’s Up and Down
[ ]/[ ] buttons to tune the radio.
Listening to AM/FM stations
1
Use the [TUNER] input selector
button to select AM or FM.
In this example, FM has been selected.
(Actual display depends on country.)
1
Press the [SETUP] button, use the Up
and Down [ ]/[ ] buttons to select “0.
Hardware Setup,” and then press
[ENTER].
2
Use the Up and Down [ ]/[ ] buttons
to select “AM Freq,” and then use the
Left and Right [ ]/[ ] buttons to
select:
10 kHz:
Select if 10 kHz steps are used in your
area.
9 kHz:
Select if 9 kHz steps are used in your
area.
3
Press the [SETUP] button.
Setup closes.
MASTER VOLUME
VIDEO
STANDBY
TONE
DISPLAYSTEREO DIMMERMEMORY
DIGITAL
INPUT
TUNING
MODEAB
SPEAKERS
TUNERTAPE
VIDEO
3VIDEO 2VIDEO 1
VCR
DVDMULTI CH C
D
SETUPRETURN
CLEAR
LISTENING MODE
AUDIOLR
VIDEO 3 INPUT
STANDBY/ON
PHONES
TUNING PRESET
ENTER
TUNING
TUNER
TUNING MODE
TUNER
Band Frequency
1
Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
2
Press the TUNING Up or Down
[ ]/[ ] button.
Searching stops when a station is
found.
1
Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
2
Press and hold the TUNING Up or
Down [ ]/[ ] button.
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
TUNING
MODE
TUNING PRESET
TUNING
MODE
TUNING PRESET
AUTOTUNED
FM STEREO