Filter
Top Products
En-27
Listening to the Radio—Continued
Displaying Radio Text (RT)
When tuned to an RDS station that’s broadcasting text
information, the text can be displayed.
Press the [RT/PTY/TP] button once.
The RT information scrolls across the display.
Notes:
• The message “Waiting” may appear while the receiver
waits for the RT information.
• If the message “No Text Data” appears on the display,
no RT information is available.
Finding Stations by Type (PTY)
You can search for radio stations by type.
1
Use the [INPUT] selector to select RDS.
2
Press the [RT/PTY/TP] button twice.
The current program type appears on the display.
3
Use the TUNING []/[] buttons to select
the type of program you want.
See the table on page 26.
4
To start the search, press [ENTER].
The receiver searches until it finds a station of the
type you specified, at which point it stops briefly
before continuing with the search.
5
When a station you want to listen to is
found, press [ENTER].
If no stations are found, the message “Not Found”
appears.
Listening to Traffic News (TP)
You can search for stations that broadcast traffic news.
1
Use the [INPUT] selector to select RDS.
2
Press the [RT/PTY/TP] button three times.
If the current radio station is broadcasting TP
(Traffic Program), “[TP]” will appear on the display,
and traffic news will be heard as and when it’s
broadcast. If “TP” without square brackets appears,
this means that the station is not broadcasting TP.
3
To locate a station that is broadcasting TP,
press [ENTER].
The receiver searches until it finds a station that’s
broadcasting TP.
If no stations are found, the message “Not Found”
appears.
RT/PTY/TP
INPUT
TUNING
F
/
H
ENTERRT/PTY/TP
INPUT ENTERRT/PTY/TP