Filter
Top Products
40
Listening to RDS broadcasts (European models only)
STANDBY/ON
PHONES
VIDEO 4
INPUT
DIGITAL
VIDEO 3
TAPE
VIDEO
4
SURROUND THX DSP
STEREO
STANDBY
DISPLAY
VIDEO 2
DVD
VIDEO
1
AUDIO
SELECTOR
LISTENING MODE
MASTER VOLUME
RETURN
ENTER
AUDIO
ADJUST
SETUP
RT/PTY/TP
VCR 2VCR 1
S VIDEO
VIDEO
AUDIO
LR
OFF
ON
POWER
TUNER CD
PHONO
DIRECT/
PURE AUDIO
PURE AUDIO
REC OUT ZONE 2
OFF
LEVEL
MEMORY
CLEAR
FM MODE
PRESET
TUNI
NG
RT/PTY/TP
TUNER
PRESET
/
ENTER
If the station you are currently tuned into is broadcasting RT
signals, they will be displayed in the front display of the TX-
SR701E/601E. If the station does not, this function will be ignored.
1. To display the radio text, press the
RT/PTY/TP button once.
• If the station you are currently listening to is not an RDS
station, only the frequency of the station will appear.
• If “Waiting” appears on the display, more time is required to
receive the RT information. When the information is received,
the characters will scroll across the front display.
• If “No Text Data” appears on the display, RT information is not
available.
• The display shows the frequency for 3 seconds and returns to
program service name.
1. Press the TUNER input source
button and select the FM input
source.
2. Press the RT/PTY/TP button twice.
The current program type appears on the
display.
3. Using the / buttons, select the
PTY program type you desire.
Displaying Radio Text (RT)
Performing a PTY scan
TUNER
PRESET
TUNI
NG
4. Press the ENTER button.
The TX-SR701E/601E will scan until it
reaches a station of the program type you
selected. It will then stop briefly at that
station before continuing on until it
reaches the next station. Pressing the
ENTER button stops the PTY scan at that
point. If you press the RT/PTY/TP while
“NONE” is displayed, “PTY ?” will
appear. In this case, return to step 3.
5. Press the ENTER button when it
reaches the station to which you
want to listen.
“Not Found” will appear when no RDS
signal is being received from the station.
1. Press the TUNER input source
button and select the FM input
source.
2. Press the RT/PTY/TP button three
times.
“[TP]” will appear if the current station is broadcasting TP
signals. This station will periodically broadcast traffic
information. To find a different station, proceed to the next step.
Also, if “TP” is displayed, proceed to the next step.
3. Press the ENTER button.
The TX-SR701E/601E will scan until it
reaches a station broadcasting traffic
information. If “Not Found” appears on
the display, a TP station cannot be located.
Performing a TP scan
TUNER