Filter
Top Products
18
Playing Your Components
—Continued
With the sleep timer, you can set the TX-8011 so that it
automatically turns off after a specified period.
To cancel the sleep timer,
press the remote controller’s
[SLEEP] button repeatedly until the SLEEP indicator
disappears.
To check the remaining sleep time,
press the remote
controller’s [SLEEP] button. Note that if you press the
[SLEEP] button while the sleep time is being displayed,
you’ll shorten the sleep time by 10 minutes.
You can connect a pair of stereo headphones (1/4-inch
phone plug) to the TX-8011’s PHONES jack as shown.
Notes:
•Always turn down the volume before connecting your
headphones.
• The speakers are not automatically muted when the
headphones are connected, but they can be turned off
with the SPEAKERS A and B buttons.
Using the Sleep Timer
1
Press the remote controller’s
[SLEEP] button repeatedly to
select the required sleep time.
You can set the sleep time from 90 to
10 minutes in 10-minute steps.
The SLEEP indicator appears on the
display when the sleep timer has been
set, as shown. The specified sleep time
appears on the display for about five
seconds, then the previous display
reappears.
Using Headphones
SLEEP
SLEEP indicator
MIN
SLEEP