Onkyo HTX-22HDXPAW Speaker System User Manual


 
15
Connecting the Speakers—Continued
You can improve the sound quality by affixing the included rubber feet to raise the speakers off
the mounting surface thereby reducing the contact area. The feet also make the speakers stable
and prevent them from moving around.
Rubber Feet for the Amp/Subwoofer
Rubber Feet for the Front Speakers
Note:
Before you wall-mount the front speakers, check the strength of the wall. The supporting
strength of the screws depends on the wall material and the position of the studs. Use screws
as thick and long as possible, with a head diameter of 10 mm (3/8") or less and a thread diam-
eter of 4 mm (5/32") or less. (We recommend that you consult a professional home electron-
ics installer.)
Affixing the Rubber Feet
HTX-22HDXPAW
Rubber foot
Speaker
Amp/Subwoofer underside
Note:
When you pick up the Amp/Sub-
woofer to affix the rubber feet,
place your hands away from the
speaker underneath.
Rubber foot
HTX-22HDXST
bottom
HTX-22HDXST top
Keyhole mounting slot
If you intend to wall-mount the front speakers using
their keyhole slots, affix two rubber feet to the rear of
each speaker for added stability.
Rubber foot