Filter
Top Products
Advanced Operations
En-40
Tuner
■ AM Freq Step
`10kHz:
`9kHz
:
Select the frequency step according to your area.
For AM tuning to work properly, you must specify the AM
frequency step used in your area.
Note
• When this setting is changed, all radio presets will be deleted.
Auto Standby
■ Auto Standby
`Off
`On
When “Auto Standby” is set to “On”, the AV receiver
will automatically enter standby mode if there is no
operation for 30 minutes with no audio and no video signal
input.
“Auto Standby” will appear on the AV receiver’s display
and OSD 30 seconds before the Auto Standby comes on.
Note
•Set to “
On”, the Auto Standby function may activate itself during
playback with some sources.
UP-A1
■ UP-A1 ChargeMode
`Auto
:
Power feeding is interrupted when your iPod/iPhone
is fully charged.
`On:
Power feeding continues even if your iPod/iPhone is
fully charged.
`Off:
Your iPod/iPhone is not charged.
You can specify how the power is fed to your iPod/iPhone
when the AV receiver is in Standby Mode.
Note
• This setting cannot be selected when:
– The UP-A1 Dock with docked iPod/iPhone is not connected to
the AV receiver, or
– The docked iPod/iPhone model is not supported.
• When the “UP-A1 ChargeMode” setting is set to “On”, or to
“Auto” with your iPod/iPhone recharging, the SLEEP indicator
is dimly lit in standby mode. In such conditions, the power
consumption of the AV receiver slightly increases. With “Auto”,
when the iPod/iPhone becomes fully charged, the SLEEP
indicator goes off and the power consumption in standby mode is
reduced.