Onkyo HT-R340 Home Theater System User Manual


 
47
Common Functions
—Continued
You can adjust the level of each speaker in speaker set A
while listening to an input source. These temporary
adjustments are cancelled when the AV receiver is set to
Standby.
Notes:
•You cannot use this function while the AV receiver is
muted.
Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted.
Speaker Set B
While speaker set B is on, you can also adjust the levels
of the left and right speakers in speaker set B, from
–12 dB to +12 dB.
These settings are stored when the AV receiver is set
to Standby.
While speaker set B is on, you can adjust the levels of
the left and right speakers in speaker set A’s and the
subwoofer.
Headphones
While a pair of headphones is connected, you can adjust
the volume of the left and right channels individually,
from –12 dB to +12 dB each.
These settings are stored when the AV receiver is set
to Standby.
Multichannel DVD Input
While the multichannel DVD input is selected, you can
adjust the level of each 5.1 channel input individually,
from –12 dB to +12 dB. (–30 to +12 dB for the sub-
woofer.)
These settings are stored when the AV receiver is set
to Standby.
Individual speaker levels can also be adjusted in
“3. MultiLevel Setup” (see page 54).
MUTING
MENU
TOP MENU
SP A
/
B
SETUPRETURN
PLAYLIST PLAYLIST
RANDOM
SUBTITLE
PLAY MODE
AUDIO REPEAT
RC
-
646S
--
/
---
TAPE
ON/STANDBY
DIMMER SLEEP
INPUT SELECTOR
REMOTE MODE
V1 V2 V3
C
DTAPE TUNER
DVD
MULTI CH
LISTENING MODE
DISPLAY
OR-EQ
TEST
TONE
CH SEL
SURROUND
STEREO
CINE FLTR
LEVEL
+
LEVEL
-
L NIGHT
VOL
HDD
CDR
MD
DVD
RECEIVER
C
D
+
10
0
CLR
123
456
789
ENTER
CH
DISC
ALBUM
LEVEL – +
CH SEL
Press
[RECEIVER]
first
Adjusting Speaker Levels
1
Use the remote controller’s
[CH SEL] button to select each
speaker, and use the [LEVEL–]
and [LEVEL+] buttons to adjust
the volume.
You can adjust the volume of each
speaker from –12 dB to +12 dB
(–15 dB to +12 dB for the subwoofer).
CH SEL
LEVEL
+
LEVEL
-
Remote
controller