Filter
Top Products
7
Getting to know Your Speaker Package
—Continued
The center speaker base is for mounting the center
speaker horizontally. If you put it on a TV stand or AV
stand, aim it toward the listening position. The center
speaker should sit securely on the base. If it’s loose, try
resetting it.
The cradle surface of the base features two stoppers to
prevent the speaker from moving. Therefore, you can tilt
the speaker toward the front by up to 11 degrees.
■
Using the included rubber spacers
We recommend using the supplied rubber spacers to
achieve the best possible sound from your speakers. The
rubber spacers prevent the speakers from moving, pro-
viding a more stable setup.
4
While pressing in the lever on the speaker
terminal on the rear panel of the speaker,
connect the speaker cable to the terminal.
The supplied speaker cables are color-coded for
easy identification. Simply connect each cable to
the same-colored positive speaker terminal.
5
(1) Insert the hook on the pipe stand into
the key hole on the speaker’s rear panel,
then (2) press and slide the speaker
downward.
Note:
Be careful not to pinch the speaker cable between
the pipe stand cover and the speaker’s rear panel.
6
Attach the pipe stand to the speaker
securely using the included screw (large).
Speaker rear panel
(2) Press and slide the
speaker downward.
Pipe stand
(1) Insert the hook into the
hole on the speaker’s rear
panel.
Screw (large x 1)
7
Completed.
Caution:
To remove the speaker from the stand, remove the
screw, slide the speaker upward to release the
hook, and reverse the steps for installing the
speaker to the stand.
Center Speaker Base
11
SKC-750XC
Base for horizontal
mounting
Stoppers
Bottom of the base
Rubber spacers
Front