30
Receiving stations
1 Select FM or AM using the INPUT
selector or the FM or AM button on
the remote controller.
2 Use the TUNING † or π button to
change the frequency.
The indoor antenna should be installed on a
wall or other surface in the position which
gives the best reception. For more informa-
tion on how to install the antenna, refer to
page 17, 19.
Display Options:
When you are listening to radio broadcasts,
the display usually shows the radio fre-
quency of the selected station. You can,
however, change to the current time or char-
acter information for the selected station. To
do so, press the DISPLAY button repeatedly
until the desired indication appears.
For more information on how to enter char-
acter information, see “Naming a preset sta-
tion” on page 33.
This function enables you to store the fre-
quencies into memory automatically, with-
out having to go through and store each
frequency manually.
1 In FM mode, hold down the MEMORY
button for a few seconds. The MEM-
ORY indicator appears on the display
and “AUTO” will start flashing on the
display. Keep holding down the but-
ton for a few more seconds to start
the Auto Memory function.
The frequencies are scanned from low to
high. Up to 30 FM stations with the best sig-
nal quality are selected, sorted in order from
low to high frequency, and stored into the
preset memory.
Note
All stations previously stored in memory will
be replaced with new Auto Memory stations.
STANDBY/ ON
DISPLAY
PHONES
MEMORY
CLEAR
FM MODE
PRESET
TUNING
R-805X
FM STEREO / AM TUNER AMPLIFIER
ENERGY SAVE
ACOUSTIC
PRESENCE
OFF/1/2/3
CD MD CDR LINE/DVD
FM AM TAPE
INPUT
VOLUME
ACCUCLOCK
DISPLAYINPUTMEMORY
†TUNINGπ
FM
AM
CLOCK SLEEP EFFECT
GRAPHIC EQ
MODE
123
456
789
10
/
0
-
- /
-
-
-
VOLUME
PRESET
F
MA
M
PLAY MODE
PLAY MODE
REPEAT
CLEAR
SCROLL
MEMORY
REPEAT
CLEAR
DISC
REPEAT
CLEAR
ACOUSTIC
PRESENCE
TONE
RANDOM
TIMER
UP/DOWN
ENTER
MUTING
INPUTTUNER
M D
DVD
C D
CDR
TAPE
REC
REC
PAUSE
/
STEP
STANDBY/ ON
Tuning the radio
INPUT
F
MA
M
or
Remote controller
TUNING
Using Auto Memory (FM only)
Hold down
AUTO
MEMORY
MEMORY